|
How to Resolve Dell Error Code 0141
|
|
Dell computers display the error code of 0141 due to a hardware malfunction. If you come across this error while using your Dell laptop, it is recommended that you communicate with the Dell Computer Customer Care Number. They would provide you with seasoned experts who would solve your issue within no time. You can also look up at some of the basic troubleshooting solutions given below:
• Using the inbuilt ePSA diagnostic Tool which would check the display, storage, processor, fan speed and other crucial components.
• To enter the Diagnostic mode, you should press and hold the ‘Fn’ key and press the ‘Power’ button. This would start the diagnosis.
• Make sure that the hard drive is properly seated and well connected.
Read More:- https://usahelplinenumbers.com/how-to-resolve-dell-error-code-0141/
|
| tracy johnson 02/13/2019 10:00 |
|
| |
Adrian Gates |
10/16/2020 16:29 |
Run Dell Diagnostic Tool
Dell provides an inbuilt ePSA diagnostic tool on their laptop that is used to scan the hardware for faults. The diagnostic tool checks the display, storage, processor, fan speed, and several other crucial components.
If something is wrong with the hardware, the diagnostic tool displays the error detail that is causing the issue such as error 0141.
To enter diagnostic mode,
Press and hold the Fn key on your Dell Inspiron laptop and while holding the Fn key, press the ‘Power’ button
The system enters into the diagnostic mode. You can follow along with the wizard and allow the diagnostic tool to run a scan
If the diagnostic scan also displays that the hard drive is not found or detected, proceed to the next troubleshooting method to inspect for physical connection.
Check If the Drive is Properly Seated and Well Connected
If you have never dismantled a laptop before, it is recommended that you should avoid this step to cause any further damage.
Disassembling a computer requires proper equipment like a right screwdriver, antistatic band, etc. otherwise, you might cause further damage to your laptop.
Still, if you want to risk it, use a clean cloth; gently clean the connectors and then reconnect the hard drive. Turn on your system and check if the error persists.
Hope this helps.
Regards,
Adrian
Technical Consultant
https://www.apps4rent.com
https://www.clouddesktoponline.com
https://www.o365cloudexperts.com
|
|
Print